|
I just changed the oil in my 2015 24.1 Axis.
To make the job slightly easier I detached the two large, flexible air intake hoses, since I was also going to change the air cleaner.
I used approximately 3 feet of 1 inch plastic hose and a funnel.
Take make the job easier I had my wife hold the hose and funnel high enough to get a good flow as I poured in the oil.
The job was actually quite easy. I did have to make ramps out of 2x12's, so I could get underneath to drain the oil and change the filter.
__________________
|
Thor Forums
