Quote:
Originally Posted by Chip
I your rig has Dicor simulators, that wrench is only used to remove (2) lug nut simulators that hold the actual hubcap on. 65/ft pounds each. Underneath, thats where you will find the REAL lugnuts that hold the wheel on the hub. If yours is like mine, the 1-5/16 nuts will be stamped with the torque value. In my case...450ft/lbs each...or in other words, one heck of a pull.
Dicor Wheels - Wheel-Parts-Finder | Dicor Products | Official Website
|
That might be the max torque of the nut itself, but I doubt if 450 ft/lbs is what your wheels are torqued at. You would never get the wheels off.