The controller will flash a red LED 1 to 9 times indication what type of fault is stopping the slide. Mine usually gives a 9 after a heavy, windy thunderstorm (hall power short to ground). Manual override gets it to move again. After a couple days with the slide out, the water in the connector drys out and all is well until there is another storm with the slide out. One of the days I pull the connector out and coat it with silicone grease. Attached is the Schwintek trouble shooting guide <http://www.amlrv.com/wp-content/uploads/2012/10/Schwintek-Manual-override.pdf>
__________________
Jim & Roy Davis
2016 Hurricane 31S
1961 Rampside in tow
|