Wires with switch by power shade

[Thor 29M]

Just purchased a 2017 Hurricane 29m. Trying figure out all the systems as the manual is of no help. I have two gray wires connected to a small push button switch that comes out of the drivers side end of my power shade. Any idea what it might control? For some reason the picture is displaying in landscape so it is 90 degrees off.
Thanks

[ducksface]

It's for setting the upper and lower limits of the blind rolling up.
If you don't have a problem, don't touch it. Just tuck it away out of sight.

[taylorbob1]

Originally Posted by ducksface

It's for setting the upper and lower limits of the blind rolling up.
If you don't have a problem, don't touch it. Just tuck it away out of sight.

So...how does one set the upper and lower limits using that special switch?

[Pete'sMH]

On the other hand if you want to change the position of the sun shield stop it’s easy to do with that button.

[taylorbob1]

Originally Posted by Pete'sMH

On the other hand if you want to change the position of the sun shield stop it’s easy to do with that button.

So...how does one set the upper and lower limits using that special switch?

[abjbrtd]

Here's a link to MCD where you can download the manual, pre 2017 and 2017 to ....

Owner's Manuals | MCD Innovations

[taylorbob1]

Thank you

[Thor 29M]

Thank you for the response. My shade limits are good so I will not touch it. The driver side of shade is lower than the passenger side by about an inch was hoping the switch would take care of that!