31E Weight Sticker

[brooking]

I'm hoping someone can help me; my daughter is looking at a Four Winds 31E and I'm trying to help her verify the curb weight and OCCC of the 31E bunkhouse model. Can someone with this floor plan post their yellow weight sticker? I realize each model may be slightly different, but it should but us in the ballpark.

[Elite Washington]

We don’t have the exact model it’s the the 30D/30fe. So. Bunkhouse just two slides instead of the one large slide. Here is the tag from getting ours weighed. The 31E should be close if not a little more. This is loaded up with everything except my wife and the fridge full.

[brooking]

Thanks, I’m actually looking for the door tag sticker that would give me the curb weight and the OCCC. I researched some and there was evidently a recall because of missing stickers or incorrect information on the sticker.

[chunker21]

Originally Posted by brooking

Thanks, I’m actually looking for the door tag sticker that would give me the curb weight and the OCCC. I researched some and there was evidently a recall because of missing stickers or incorrect information on the sticker.

When you get one that's only half the information. Explanation; many/some class C have a very low OCCC and the distribution isn't equal front to rear. Just for example purposes, let's say the yellow sticker, Tire and Loading Sticker, indicates you have 2000 OCCC but unfortunately you don't know where it can be loaded without a trip to the scales. There are many cases where that available OCCC is only available in the front based on front and rear axle weight ratings. Sadly most of the storage compartments in a C are in the rear though. This is why I feel every RV should have a weight ticket from a visit to a CAT scales. 2 ways to work it, insist the dealer take it to the scales ahead of time or include a trip to the scales on your test drive.

The RV you are inquiring about I have no knowledge except general weighing criteria.

[brooking]

Good points, and I certainly plan on getting it weighed to verify loaded weight before setting any tire pressures. Just thought if someone had a similar unit, I could get some early info.