Bubbles in the Flooring

[LickinFlames]

We just completed our maiden voyage in our rig (OMNI, XG32). A few bits need to be tweaked, but the flooring has two large bubbles in it and that has me a bit concerned. The total area of the two bubbles is about 6 sq feet...they're large. They seem to be made more evident when the heater is on but that could just be a coincidence. The rise about 1/2 inch from the subflooring. Besides taking it into the dealer (the appointment is booked two months from now...first available)...what could cause this and what can be done.

[Jeffc]

I read a post in this forum about this issue. Does possibly have something to do with airflow from furnace. There was specific suggestions on possible fix. Use the search to find it.

[LickinFlames]

Originally Posted by Jeffc

I read a post in this forum about this issue. Does possibly have something to do with airflow from furnace. There was specific suggestions on possible fix. Use the search to find it.

Thanks. I just did that per your suggestion. Seems very common. I suppose in the big scheme, the bubbles are not as bad as the converter throwing in the towel on the first trip. But the bubbles bother my partner...a lot. I thought at first that I might be able to heat the flooring and roll it back down, but there is apparently no adhesive underneath to stick too. The deniability has already been set into motion. I called THOR and was told that the dealer needed to look at it. The dealer will then ask for THOR's advice and the response will be that it works as designed. Then the dealer will be able to look at me and tell me that it's not an issue for THOR (or therefore the dealer) and I'll be holding a bag of something special.