I have a 2011 freedom elite 28 u 12 ft slide out one side goes out for inches and stops other side does not do anything not sure if there's two motors and if so where would they be located not sure if it is Evan a motor problem any suggestions
If its a Schwintek slide it will have two motors, each located in the upper two corners of the slide/wall. From your description it sounds like one motor is working and the other is not (for many possible reasons).......or perhaps you have something jamming or preventing movement in the side that does not move? You should not force the slide out if one side is not moving or serious (expensive) damage can occur. Return the slide to closed position and try to locate the slide controller unit which is usually mounted in a basement bin near the slide it controls. There may be codes set on the controller (flashing lights) that may provide information on what the problem is. The controller may have the code definitions printed on it or refer to the manual you should have received with your coach (or get it off the net). There are also many YouTube videos for troubleshooting Schwintek slides that you can find on line. It could be as simple as the wiring connector on one motor has become disconnected.