If you look at it, the tray in use is an exact replica of the opening above your head. It hangs on brackets from the open space sides and back. There is a terminal strip behind the ice maker to the rear, mounted on the tray. It plugs in to a factory outlet under a cabinet in the proximity of the bunk. I don't run all three at once, either the two coffee makers or just the ice maker.
The tray is 1/2" plywood. A 1- 3/8" lattice strip is bent around the tray perimeter to make a lip to contain any spills. It is a little hefty with the ice maker, but you only need lift it about two inches to clear the opening and it slides to the rear and over the chocks that hold it in place. It slides on felt chair leg protectors.
__________________
Making a smooth transition to senility for over 70 years
2017 Freedom Elite 29fe
2015 Jeep Wrangler Toad
|