Quote:
Originally Posted by TomAndLindaRogers
Last year our passenger captain’s chair in our Axis 25.2 began rocking. Upon inspection I found the undersized cotter pin that locked the nut in place had been chewed up by the nut because the bolt was too long. See the attached pictures. Since I didn’t have a shorter bolt, I added a washer so the hole in the bolt matched the nut when properly tightened. I then locked the nut in place with the correct size cotter pin. My guess is you will find a similar nut locking problem when you can get to your motor home.
Tom
|
Just I noticed the Drivers seat rocking today, and thought I need to check that on it and the passenger seat, now I see this, and think I definitely need to check it out. Another potentially disastrous defect. Should make a report to the National Highway Traffic Safety Administration.
2017 Challenger 37TB here.
Thor Forums
