|
Great info GM tech, Did you have your shades done in all your windows (including the cockpit) when your rig was in full sun?
Did you use any of the reflective bubbles in the RV at all?
I think the only "easy" way to make the AC more efficient on our rigs is to reject as much heat as you can before it gets into the RV.
If your in one spot all day (or longer) try and use reflective bubbles.
I know my window tint helped tremendously esp driving down the road.
Plus adding the clear tint to my shower skylight and the fat mat to the tops of the roof vents helped further. I did a write up on this about a week ago.
On Saturday I was working on my Axis and I put my hand on the inside wall with the full sun on it and it was very warm. No wonder the AC struggles. If they just made the wall 1/2 thicker with foam insulation that would help tremendously. Plus if we had double pane windows.
I thought about this on SAT as well..... It would be nice to have an awning on the driver side that way you can put it out for the afternoon sun to keep the entire side of the RV in shade. I also thought about if you mounted hooks on the side of the RV about in inch below were the walls meet the roof you could attach a 20 x 8 sunshade of some sort and anchor to the groud with stake or weights of some sort. You might be able to use some of those industrial suction cups (the kind with the lever that holds incredibly well).
Also if we have an option on the way the RV is parked - it would be much cooler to have the rear of the RV in the direct sunlight (esp in afternoons). Not only is the wall much smaller compared to your side (only 94 - 101 inches on most RV's) it wont have the front cockpit windows to let the heat in. Put refective bubble in the rear windows would be help as well.
Let use know if you come up with any more answers. Thanks for your time and relentless pursuit of perfection.
__________________
|
Thor Forums
