I'd love for someone to experiment with hooking up the wiper stalk-switch. It would sure be more convenient!
I suspect the issue is with the intermittent wiper function. The stalk-switch has the normal three or four positions for intermittent and one position each for off/slow/fast. The Thor switch uses momentary push for on/off and up/down to increase the delay and wiper speed.
If the smarts to interpret the pushes are in the switch unit and it sends "standard" on/off/fast/slow signals to the wiper motor it may be possible to enable the stalk-switch. On the other had, if the intelligence is in the motor and it expects momentary signals then it won't be possible.
Regards,
Randy
__________________
|