Quote:
Originally Posted by mr1a2guy
I contacted LCI and they sent out a new pressure switch. I installed it and I still have the same issue when I release the Parking Brake. I spoke to a RV mechanic and he said the E-brake switch is good it if the brake light goes on and off, which it does. So that rules out the brake switch.
Does any know how to test the pressure switch to see if it is working? This is getting very frustrating. I don't really want to have to go to the dealer to get it fixed.
|
I assume you cycled the jacks a few times to purge the lines of air after installing the new Pressure Switch. It can take a few cycles to purge the air out before it build and holds pressure.
Take a look at these Troubleshooting Guides and they may help you pinpoint or at least narrow down your problem.
Thor Forums
