Quote:
Originally Posted by jtyphoid
When I select CUSTOM for the battery type on the Firefly control panel, three new +/- items show up on that same screen right below the battery type button. Those allow absorb, float, and equalization voltages to be set.
I do have an ME-ARC50 remote, but Magnum told me that the I/C can only be connected to one control device at a time - either the ME-ARC50 or the Firefly (via the ME-RVC bridge). They also told me that the only settings stored in the I/C are default settings. All changes from the default are stored in the control device. I was hoping that I could configure the I/C with the ME-ARC50 then swap over to the Firefly, but swapping over loses the configuration from the ME-ARC50 as best I can tell.
|
Thank you for the details! Greatly appreciated!