Quote:
Originally Posted by Porthole
Your link is ambiguous at best.
This line from the link:
“ Bearing Lubrication - Oil
If your axles are equipped with oil lubricated hubs, periodically check and refill the hub as necessary with a high quality hypoid gear oil to the level indicated on the clear plastic oil cap. The oil can be filled from either the oil fill hole, if present, in the hub or through the rubber plug hole in the cap itself. ”
As I mentioned before, not all caps have a ‘level line’, especially the older white plastic caps.
What that link dances around is ‘periodically check and fill if necessary’’.
If it needs fluid it most likely needs service.
The truck videos in the next post are not relevant to this thread.
|
Did you find a cap or axle that didn’t have a fill mark?
Did you find instructions from an acle manufacturing company saying to fill to the plug?
If you did post it
Do you want people to over fill their oil hubs for some reason?
How about posting the Supporting info, not just your thoughtd
Thor Forums
