Quote:
Originally Posted by Windsport_29_M
Hi thank you for your response.
The sensor has plastic clips holding it on. Is your sensor held on the same way?
|
That is correct. It has three plastic clips / fingers that hold it to the pentagonal fitting on the tank.
Be careful trying to reposition it. I think it really is meant to only go on one way so you don't want to break the clips.
You could just hold the sender against the pentagonal fitting and rotate it with your hand while someone inside sees if the level changes. The gauge should move as you rotate it and the level inside should change as well.
That will tell you that the sending unit is registering the different levels and the the inside display is getting that data.