This is the only connection point on the chassis located just above the batteries on the inside of box. Pretty much where I would expect to find the breaker.
Removed batteries and charged, now reading 12.7V at 100% New in July 2019
Installed batteries, no progress.
Voltage once connected is the same regardless as to whether the AC is connected.
Batteries are located just inside the door under floor. Have followed leads to every connection point. House batteries to the connection terminal pictured above. This is also where the starting battery lead terminates. Then aft along chassis and up into AC-DC converter and aft again to the genset. Pulled all interior panels and inspection ports along the way
There is not a breaker unless it is inline and inside conduit or hidden.
At this point will have to make do as it is and will bring wire tracer home next week
Thor Forums
