Converter or fuse?
I have a 2003 30' Thor Hurricane. yesterday morning my generator started up just like usual. In the evening I pressed the start for the generator and nothing happened. I had no power for anything. I started up my external generator and everything worked as usual. When I shut it off, again the internal generator would not start.
I spent most of today checking the brand new house batteries (two one week old 6-volt AGM's), they were fully charged. Then I checked all fuses that I could find, they were all good except I couldn't find the fuse between the positive battery terminal and the converter. I checked the converter as per a video I watched. With the external generator on everything I checked re the video checked OK except for the voltage between the unconnected negative wire and the positive terminal which the video said should be equal to the battery voltage. It was zero. So they said to look for a fuse on the positive wire between the converter and the battery. I couldn't find one but then that wire is buried in a maze of covered wires.
Any clues as to where it may be? Is that the most logical conclusion? It seems to be to me. It is an Intel Power 9130 converter and there is also a Light Automatic transfer switch which seems to be ok.
Any quick help would be appreciated.
Thanks
Mike
__________________
|