A little off topic but also a little related....
I have a Progressive Industries hardired EMS-HW50C and I installed it after the transfer switch (I did it this way in case the generator ever has any power issues... I figure a transfer switch is less expensive and easier to replace than an A/C or fridge).
In any case I have the time delay set in the EMS to 136 seconds so it takes over 2 minutes until any AC power is supplied to the coach.
I confugured it this way in case there are any major or continuus surges / outages due to storms or other issues. It gives the A/C compressors more than enough time to cycle before power is restored to the coach.
It also allows the generator to warm up a couple minutes before it starts supplying any power to the coach. This allows me to meet Onan's warm-up recommendation per the manual.
So in any case, I should have no issues using AGS if I would choose to do so.
__________________
|