Quote:
Originally Posted by greg&bev
ive pulled strainers and water restrictors on the shower,ive also bought a new shower head im going to try.the water coming out of the toilet valve in the bowl is no ware near the pressure of the master toilet. i did pull line to toilet and it seems fine.i want to clean jets in that flush assembly in the toilet but don't want to break it taking what looks like the cap off. maybe i need to live with it until i take it in as its only 2 months old.
|
Here's what I would do with a 2 month old RV with these problems: Define the problem.
Get out a 2 gallon bucket, put 1 gallon of water in it from a measured device (like an old milk jug or clorox bottle) and mark that level on the bucket.
Get your pen and stopwatch (it's right thereon your phone).
Fill the FW tank
Using the pump measure the time it takes to get 1 gallon of water from each of the cold water points with aerators removed, shower head removed, from the supply hose for each toilet, and the outside shower hose with the head removed.
Now you have real data to help you determine where the problem may be if you want to pursue fixing it, or to give to the dealer to show that you have a real problem.
Others with the same model RV may do the same experiment for you for comparison. I can do it on my RV but it's a completely different model with an upgraded pump so it wouldn't be a good comparison. But ask and I'll do it for you.