Quote:
Originally Posted by TexAxis
SuperD, which thickness Dynaliner did you use over top of the 3/4" Dynamat? I'm getting ready to do the same on our Axis.
|
I used the one labeled Door kit that covers 12 sq/ft. There are several sheets in the box and I had one left over. I used the full sheets as best I could and then cut smaller pieces to fill in the gaps, the stuff is REALLY sticky. I roll of tape was enough to cover all the seams but I didn't have any left over. Be sure to leave spaces for your mounting bolts, I covered everything and then cut the slots for the bolts.