Go Back   Thor Forums > Thor Brands and Products > Thor Motor Coach | Class A, Class B+ & Class C Motorhomes
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 05-03-2019, 05:09 PM   #1
Junior Member
 
Brand: Thor Motor Coach
Model: Outlaw 29H
State: New York
Posts: 15
THOR #15098
auto leveling remote control

New to the RV thing, and still have much to learn. For right now, I'm wondering if anyone has any experience with the auto level remote on a 2016 Outlaw 29H. The former owner only mentioned that he had never used it for fear of interrupting the down and up cycle of the jacks. The remote requires a pin code that I do not know. So 2 questions.....Can I set my own pin code, and would I be able to, let's say, lower the front two jacks to allow for a little less angle on my ramp in the back for loading motorcycles? On level ground, the ramp angle seems too steep. I slipped and fell the first time I tried to walk up the ramp, so I thought it would be a good idea to make a couple ramp extensions. Haven't tried them yet, but the thought occurred to me that if I could manually lower the front 2 jacks, it might lessen the ramp angle. Any thoughts on this?
__________________

__________________
omar1951 is offline   Reply With Quote
Old 05-03-2019, 05:20 PM   #2
Senior Member
 
Miramar Owner's Avatar
 
Brand: Thor Motor Coach
Model: Miramar 34.4
State: Iowa
Posts: 655
THOR #4488
Quote:
Originally Posted by omar1951 View Post
New to the RV thing, and still have much to learn. For right now, I'm wondering if anyone has any experience with the auto level remote on a 2016 Outlaw 29H. The former owner only mentioned that he had never used it for fear of interrupting the down and up cycle of the jacks. The remote requires a pin code that I do not know. So 2 questions.....Can I set my own pin code, and would I be able to, let's say, lower the front two jacks to allow for a little less angle on my ramp in the back for loading motorcycles? On level ground, the ramp angle seems too steep. I slipped and fell the first time I tried to walk up the ramp, so I thought it would be a good idea to make a couple ramp extensions. Haven't tried them yet, but the thought occurred to me that if I could manually lower the front 2 jacks, it might lessen the ramp angle. Any thoughts on this?
The pin code is 0000 unless the former owner changed it. As far as using it, it should work just like the controls in the coach.
__________________

__________________
Miramar Owner is offline   Reply With Quote
Old 05-03-2019, 05:22 PM   #3
Senior Member
 
Brand: Thor Motor Coach
Model: 29h outlaw
State: New Jersey
Posts: 237
THOR #5248
First, the pin code on mine is all zeros. Factory code.

I load a 920 lbs Harley in mine. Yes I sometimes raise the front to lesson the angle, but I do it from the panel inside. Engine running,brake on, scroll panel to manual and press the front button.
__________________
Trkyte@msn.com is offline   Reply With Quote
Old 05-03-2019, 05:34 PM   #4
I Think We're Lost!
 
Bob Denman's Avatar
 
Brand: Still Looking
Model: Tiffin Wayfarer 24 BW
State: New York
Posts: 10,661
THOR #8860
Yup! All zeroes is the default code...
And welcome to the Forum!
__________________
Good Sam Member 843599689
FMCA Member F473304

Current coach: Tiffin Wayfarer 24 BW
Former coach: Thor Outlaw 29-H
Bob Denman is offline   Reply With Quote
Old 05-03-2019, 05:35 PM   #5
Junior Member
 
Brand: Thor Motor Coach
Model: Outlaw 29H
State: New York
Posts: 15
THOR #15098
And when you're done loading/unloading, do you use the auto panel and just retract and start over again?
__________________
omar1951 is offline   Reply With Quote
Old 05-07-2019, 02:37 AM   #6
Junior Member
 
Brand: Still Looking
State: Massachusetts
Posts: 3
THOR #14311
The remote on our 2018 29H works for everything but the levelers. Not sure why (coach is new to us). I did use the front jacks from the inside to lessen the angle for loading the motorcycle. And it worked great!
__________________
gadgettr1 is offline   Reply With Quote
Old 05-07-2019, 10:28 AM   #7
Junior Member
 
Brand: Thor Motor Coach
Model: Outlaw 29H
State: New York
Posts: 15
THOR #15098
Thanks to all for your input. I'll practice with the remote when I pick the unit up from service, and I definitely want to try lessening the angle to load the bikes.
__________________
omar1951 is offline   Reply With Quote
Old 05-07-2019, 11:45 AM   #8
I Think We're Lost!
 
Bob Denman's Avatar
 
Brand: Still Looking
Model: Tiffin Wayfarer 24 BW
State: New York
Posts: 10,661
THOR #8860
Quote:
Originally Posted by gadgettr1 View Post
The remote on our 2018 29H works for everything but the levelers. Not sure why (coach is new to us). I did use the front jacks from the inside to lessen the angle for loading the motorcycle. And it worked great!
Glad to hear that you're getting it sorted out!
(Did you ever find the charger for the Rapid Camp remote? I've had a spare one pop up here... )
__________________
Good Sam Member 843599689
FMCA Member F473304

Current coach: Tiffin Wayfarer 24 BW
Former coach: Thor Outlaw 29-H
Bob Denman is offline   Reply With Quote
Old 05-08-2019, 02:21 AM   #9
Member
 
Kickstand's Avatar
 
Brand: Thor Motor Coach
Model: Outlaw 29H Class C
State: California
Posts: 79
THOR #7010
Quote:
Originally Posted by gadgettr1 View Post
The remote on our 2018 29H works for everything but the levelers. Not sure why (coach is new to us). I did use the front jacks from the inside to lessen the angle for loading the motorcycle. And it worked great!


I noticed my remote doesn’t work if the panel is off. So I hit the On button as I grab the remote. Also, the remote’s arrows don’t seem to work for manual retract of just one side, but retract all does.
__________________

__________________
Kickstand is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Thor Industries or any of its affiliates. This is an independent, unofficial site.




All times are GMT. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2