Quote:
Originally Posted by thor293
I had a receptacle that had the 7 way and 4 way connectors both on it. That way I could connect the dolly to the adapter and also the toad itself to the adapter.
I assume you need a 5 way for the dolly and a 4 way for the toad.
I used an adapter 7way to 5 way and then just plugged the 4 way into the receptacle on the side of the 7way https://www.etrailer.com/Wiring/Hopkins/HM47570.html |
Thx for the input I'll check it out. My tow dolly is a 7 pin but probably only uses 5 wires.
Thor Forums
