Quote:
Originally Posted by gmtech16450yz
If the monitor you bought has RCA in, try using any of the three RCA outputs on the switch box. I ended up using the one directly mounted on the box that's labeled "Video Out". One of the other two on the pigtails work though, I don't remember which one but I would assume the yellow one since that's usually the color of RCA video.
|
So, still no joy! I tried all the rca plugs available, nothing but blue screen/no signal. I spent some time shortening wires from the video box to get rid of some of the rats nest. I cut & used crimp on butt connectors, instead of the twist on wire caps that were on them. I saw that the wires for Camera #1 & #2 were connected to other wires. But, the blue wire labeled Camera #3 was not stripped and dangling loose. There was also a green wire loose as well. In all this mess the right side mirror camera has quit working and the pigtail going into the video box is hotter than a firecracker! I quickly unscrewed it and left it hanging. Sheesh! I also figured out that the power pigtail going to the "Assera" 614 has two hot wires. Not hot and negative as expected. I'm just shaking my head!