Quote:
Originally Posted by fivejackie
Our Hurricane 27K dinette makes a lot of noise clanging the 2 metal tubes that support the table. I've tighten up all the screws and still have the problem.
Also, the metal legs have labels on them that read, NOT TO EXCEED 5 MPH. Where can you store this table when under way? Nowhere in the manual does it say any thing about this.
|
Gosh, We have the same issue! We took it for a short drive some weeks back and couldn't figure out where the "clanging" was coming from. We finally isolated it to the table legs. DH pushed them down more firmly into their holes and the noise stopped...for a couple miles...but then came back. We haven't had a chance to try to resolve this issue as our
2016 Hurricane 27K has been at the dealer's service department since June 17.
We took possession of it May 21. We are getting more and more frustrated as we try to get what we thought were 2 major and several minor warranty issues taken care of. We didn't include the noisy legs so as to try to keep our fix-it list shorter.
We never noticed the "5 MPH" label! It doesn't make sense.
It seems OUR dealer's service department has a problem "communicating" with Thor, & with trying to decide whose responsibility it is to fix these issues. Needless to say we are beyond irritated!
I have been in touch directly with Thor and that seemed to get a fire lit at the dealer - but only time will tell.
When we get it back we'll revisit the
rattling table legs issue and see if we can suggest any solutions.
Thor Forums
