tank fill valve
I'm finally getting around to adding a tank fill valve. been wanting to do this for years
I pulled off the dead panel from the kitchen cabinets....actually both of them...the ones pin nailed in place
cut into the water line after the pump. Using PEX and sharkbite fittings, and a brass ball valve, I plumbed a loop back over to the suction side of teh pump, where the winterizing port was. While at it, I added a quarter turn stop cock and a piece of tubing for easier winterizing
No I don't have to get out the second hose and drag to the other side of teh RV when I'm hooked up at a CG!
__________________
|