Quote:
Originally Posted by The Gritz Carlton
They are for sure the seat belt bolts. If you don't want seat belts you can remove them and install flat head stove bolts from the top down, same diameter into the holes to plug them up. Coat the new ones with sealant before installing. Your adhesive for the new floor will fill in any small indentation on the surface. Also, make sure you grind the bottom (outside under the slide) off as low as you can so the extrusion doesn't hit anything along the way in and out.
|
Thanks for the input.... we will fill the hole and the vinyl plank will cover them completely. We will never need seat belts there again with the way we now have recliners we move off the slide then parked.