|
Power Question
Hey guys I have a question, last night the power to our refrigerator and outlets in the bedroom went out briefly and then came back on. This happened at least 5 or 6 times through out the night. These outlets are wired through the inverter, the two outlets in the bedroom were wired by DRV to power our C Paps along with the fridge.
When I looked at the EMS I have a "PE4" code that is showing. I'm confused because the EMS is also showing L-1 118 volts and L-2 119 volts and "E-0" is also showing in the read-out on both lines.
In the manual it says to re-set the EMS all that has to happen is for the power going into it to be shut down. I went out to the pedestal and flipped the 50 amp breaker off and then back on. I'm still getting the "PE-4" code though. Unfortunately I don't have a multi tester with me so I haven't checked the actual voltage at the pedestal.
Any suggestions or ideas? I would greatly appreciate your thoughts. Thanks
Dan
__________________
|
Thor Forums
