LDK - I swapped the ME2012 for a MS2812 which took about 30 minutes. I changed to the MS because many of my wife's appliances would not work on the ME. I went to the MS2812 for future expansion ability. The ME2012 and now MS2812 only provides power to the subpanel and not the main. The MS2812 is quite a bit heavier, so wrestling it in place is the hardest part.
I also added solar and upgraded to Battleborn LiFePo batteries, and Magnum said the 2/0 cables were fine because it's only ~2' run and I'm not using the full potential of the inverter. I will upgrade the cables to 4/0 when I rewire to add a cutoff switch and Vitron BMS.
__________________
2018 Palazzo 33.2
|