4 Wires there: Open the hatch to the right that covers the black tank and see if the sensors are wired up (4: 1 wire on the bottom, then a 1/3 wire, 2/3 wire and F wire).
Since that is the sewer bay and the tanks are right next door I'd bet that is what the wires are for.
Edit: Just looked at the sensor wires on my 24.1. My sensor wires are a much smaller gauge--like a telephone wire. Doesn't mean those aren't them but it is likely they are something else.
I also looked around my sewer area and there was no wires in that compartment at all.
I think I'd start crawling around underneath tracing them down to figure out where they go.
|