Upfitter lights F600

[rjt30114]

Finished my bumper install.. Thank you for the information Judge but wired in the the 20” LED to the pre wired Upfitter panel only to realized that the switches have no power. Checked all fuses.. Any suggestions..

[Geterdun]

Originally Posted by rjt30114

Finished my bumper install.. Thank you for the information Judge but wired in the the 20” LED to the pre wired Upfitter panel only to realized that the switches have no power. Checked all fuses.. Any suggestions..

You may need to install a fuse in an empty slot or even install a relay in an empty slot. Just because the wires are there doesn't mean they would make them "hot".

[jeepkevin]

I'm in same boat on my 22' Omni F550. No power to overhead switches, they don't light up. I checked all my fuses in the aux box, verified it was connected to battery. Next step is I want to pull upper console loose and verify switches are still plugged in. I also can't use the FordPass app, it can't see the truck. I'm convinced something wasn't plugged back in during the build out of the motorhome.

[RobintheHood]

Sideview pic and manufacturer please!!! Maybe I can talk her into it as Elk/Moose protection for the Canada/Alaska trip...

[RobintheHood]

Attached is a Service Bulletin from Ford on Upfitter switches. I hope it helps.

[Judge]

RobintheHood beat me too it with the Uplifter SB!

Bumper looks great!!!

I have used 4 of the 6 uplifter switches so far for things like providing power to my Light Bar and power to my RV GPS, TPMS and Dash Cam.

[jeepkevin]

Thanks "Robinthehood"!!

On my 550, that accessory box is on the passenger side up near the firewall. I'm sure the electrical side of things is very similar. I hope to dig into this soon.