Marker Clearance Lights 28A

[LarryW54]

Good Morning,
I have a Majestic 28A (CA) and m front Marker lights are out. I have signal traced and found that the break is somewhere above the Drivers Side in the Bunk Area. Does anyone know HOW the wiring is Done to I don't have to tear up everything to find the break? In other words, does the Wire go along the side, across the middle, or down into the Drivers door. I think it is the Orange/Blk wire (hot). The lights themselves are good (tested) Just not getting power from the Fuse Box. The Back Markers are OK.
Thanks

Larry W

[blw2]

have no idea if yours is the same
but mine come out of the side wall over the driver's head

[blw2]

another angle to gain perspective

[LarryW54]

Originally Posted by blw2

have no idea if yours is the same
but mine come out of the side wall over the driver's head

Thank you, this is a tremendous help

[blw2]

you're welcome

do you have your schematics from Thor? That might be helpful.

additional comments
in my rig the wires come out there and as I recall are totally loose in the cavity all the way up and they connect from one light fixture to the next. No connections inside....and I sorta doubt a break is inside there.

When I took my OEM fixtures off the wire pulled out with a good bit of slack. Just a guess.....My bet is if you pull the first fixture off you could tug the wire out and find the issue where the series connection is made at the fixture.

Otherwise it's probably way back down the harness someplace

[LarryW54]

Thank you. I finally got the unit to my house and can now do some real troubleshooting. I will post what I find