Originally Posted by racer
Does someone on here know the wiring for the six wire switch going to the awning?
Let's assume you have a CoC Latitude patio awning and not a Dometic. The heavy red (positive power) and black (ground) are always hot so the auto retract will work. The other 3 wires go to the momentary rocker switch to send a command to the awning's direct response module. The small yellow wire is the power wire to the switch. Connecting the brown and yellow wire will start the extension (out). Selecting extension again with the switch will stop the extension. Connecting the yellow and gray wire will start the retraction (in). It is not necessary to hold the switch in as once started the operation is automatic. If you have a Rapid Camp module the operation is somewhat more, well, interesting.