Quote:
Originally Posted by Eeeride
Thanks SuperD for the suggestion. Pulled out the back & bottom panels under the sink. Found what I believe was the “kinked” hose causing the leak when opening and closing the slide and rerouted to avoid “kinkage”. At the same time, I removed the extra 5 feet of heater ducting the factory left on and switched the sink hot and cold water supplies to where they should have been to start. Three repairs in one location! Thanks Thor.
Happy New Year’s to all of you.
|
Good job Eric...If you have a chance and $$ I recommend you also change out 2 of your roof vent fans and put covers on them (see pics attached). It has made a world of difference especially in our West Texas summer!! It also helps if anyone in your crew is vertically challenged (
)