Quote:
Originally Posted by halfprice
To disinfect its best to add bleach to a gallon of water and pour it into the tank. Then fill tank. Go inside and turn on each facet/shower one at a time hot and cold until you smell the bleach. That way the bleach gets in all the lines and the hot water tank. Let sit for 24 hours, drain at tank and low water point, then refill. You will probably smell the bleach for a couple of days but that's ok.
There is a reset button under the bed for the Rapid Camp. Make sure the remote is charged. You may only need to push the reset button and not need a reconfigure.
Run all your water lines, and from time to time look under the mh to make sure there are no leaks. Don't forget the outside sink and remember it has a mac pump to drain that sink. The switch is under the cabinet. At night turn on all your lights inside and out. Make sure they are all working.
Keep a notebook on the dash or table. Just camp and have fun. When you see/find something that needs fixing write it down so you don't forget.
I've only had very minor things that needed warranty to fix. More adjustments then broke. Water heater electric element did go out so run your water heater in both gas and electric at different times to make sure they both work.
Have fun Jerry
|
Hi Jerry, we have the 2018 Windsport 29M and noticed that the Rapid Camp remote only extracts the jacks.
Thor says that this how the remote is supposed to work. Does your Rapid Camp only extract the jacks also?
Can you tell me exactly where on the bed the reset switch is located?
BTW, really love all the mods you and everyone else share! Love this thread!
Thanks,