Quote:
Originally Posted by Red
Hello,
Was looking into updating the converter. Decided to stick with the original and see how things go. After looking it up, the reviews are good. I did stumble on suggested mounting and well, Thor screwed the pooch. The unit should be mounted with the fan on the bottom or side. Mine was mounted with the fan on top and so close to the bottom of the board the bed sits on that no air could move anyway. There was enough slack in the line to move it to a sideways mount. Now we have much less fan noise and pc of mind. I recommend having a look at yours to see if you have the same problem.
Our track bar came in. BUT not in the original package and missing over half the parts. UPS must have busted the box and didn't get all the parts in the repack job. Called and a new one shipped in minutes.
We ran to the Hocking Hills a couple weeks back and must say the CHF and Dampener made a huge difference. Looking forward to the Track Bar and rear CHF.
Thanks to all for posting your work and observations. They have saved much aggravation and helped make our unit more usable.
Red
|
Red- Thanks for sharing, I'll check my converter install today.
Which rear trac bar did you go with?