Was tired of the ac and dew/water dripping down my front and side windows. So I bought a 25' piece of trimlok drtrimlok
Jery
Trim-Lok Drip Rail – Black, PVC...
https://www.amazon.com/dp/B01CJRGX5M?ref=yo_pop_ma_swf
Started the install today. Got the passenger side and doggy window done. Its freaken hot outside so I might finish tomorrow. Should have started when I woke up but was very busy doing nothing
Hopefully it holds up and catches the water. Our front side windows overlaps the front cap so the cap seem is towards the front of the window preventing me from using one piece. I'll try to build a ramp/drip rail out of silicone or something else to divert this little bit of water into the trimlok
Will post more as I get more done
Pics of dirty window. You can see the drip lines. Have this on the windshield also. Very annoying
Pics of trimlok installed. I put the tape to hold it in place but its really not needed. I'm just anal that way. It takes up to 72 hours for the 3m tape to cure. Wanted to make sure the bended part didn't loosen up.
Also used a wrench to push the tape /trimlok down to help bond the tape. The wrench really let's you put pressure on the trimlok