Quote:
Originally Posted by Mlleml
Make sure the tank is full before turning on the heater or you will burn out the electrical heating element in a hurry. Either lift the relief valve at the heater or turn on a hot water faucet to ensure you have flow (ie full HW tank).
When you flip the propane switch on the panel there may be a red LED light that lights for a few seconds then the burner will light; don’t get worried when you see the LED go turn off.
There’s no LED associated with using the heater on electric, just ensure there is water in the tank.
|
You will still get water from the hot side of the faucet if you have your water heater valves on bypass
Thor Forums
