Quote:
Originally Posted by halfprice
PE is prior error and if I remember correctly code 4 is low voltage for Progressive ind ems.
So the ems is telling you there was at some point low voltage and the ems will shut down power until the voltage get to the correct amount. It does this to prevent damage to your mh equipment
I have seen this myself at some campgrounds. THe voltage drops just for a couple seconds then come back up. Everything shuts down than comes back on
You need to look at the ems meter when its shuts down to see what it says for voltage. If I remember correctly it will shut things down at 104 volts.
SOunds like it working properly to me. Now if the voltage never dropped down then there could be a problem
Jerry
|
well said!
my Progressive works just like you described
E 0 means no current errors, but the PE 4 still displays to remind you that an error previously occurred
if you unplug, reset the module & plug in again...the PE 4 will not be shown until there is another error to display
Thor Forums
