Quote:
Originally Posted by Thor Axis 2018
New to this forum and reasonably new to Thor axis. I have already taken much advice from these threads and plan to post my own support in the near future.
So I recently took the cover off my Thor axis 2018 airxcel unit and it looks to me like the I summation wall is in the wrong spot. It seems to need to slide over to put the opening all on the same side. Can anyone advise? I am attaching a pic.
I can easily move and HVAC tape but I wanted to make sure that is accurate.
|
Yep, tape it up. That will make your AC work much better.
I also taped around and cracks / joints and I tired to smooth out the air flow (using the tape) going into the roof ducts.
Get a "car" AC temp probe from AutoZone and stick it in your air ducts (with your AC cover back on). See if you can get your output temp around 40 - 45 deg. Mine started out around 65 deg last spring.... now its consistanly 45 deg with no problems.
__________________
2017 Axis / 25.4: Big Foot Levelers, Aims 1200 Watt inverter, Ceramic Window Tint, Full River AGM 6V batteries, Front Hellwig Sway bar / Rear Track Arm, Safe T Plus Steering Stabilizer, PD 4655 converter, Hard Wired Surge Guard, WEboost + WiFi Ranger, LED Headlights/Driving lights, TPMS, Surge tank, Tornado flush, Viair Compressor
|