Quote:
Originally Posted by engrprof
Hope this pic shows on the post: You should be able to see the 4 pop rivets and 2 screws that hold the cover on the Surge Guard unit. I need to remove the cover plate to remove the 4 screws holding the unit to the back of the basement compartment. I need to move it about 3" up and to the right to make room to install the hand power cord reel shown also in the pic. I bot it for $20 from Harbor Freight. I replaced the long crank handle with a golf ball to save room. Thanks for your advice.
|
Thor did not rivet the ATS closed after it was installed. You should be able to get to the mounting bolts without removing the cover.
Thor Forums
