Quote:
Originally Posted by Aundie
Same problem here. I called Atwood customer service, and was instructed to unplug the main water heater wire and wait 15 secs. I Reconnected the wire and heater works fine. It’s the way the heater resets it’s self. I hope this helps.
|
Which wire is the main water heater wire? I unplugged the connectors on the control board, flipped the breaker and checked the switches on the Thor control panel.
I'm running into an issue where I turn on the 110V switch, and it uses propane instead of electric. I rather not use the propane while I am hooked into shore power to heat my water using my GC6AA-10E.