Thor Forums

[DavidEM]

Originally Posted by Jumbo Mug

Hi David,

I went ahead and called NAWS and they said you are right about #8 wire being too small, so will redo with #2 when get home.

They said the 150a breaker was correct and that the Victron is rated for up to 1450w so it’s ok too even though it says 100a.

Thanks

Mike

Be careful about what people tell you. The Victron may be rated for both 100 amps and 1450 watts, WHICHEVER IS LESS. I would prefer to hear that from Victron, not a dealer. In any case you are operating on the edge.

Your 150A breaker will work fine with #2 gauge wire.

Did they say anything about the high voltage in the input wiring?

David