Quote:
Originally Posted by RodIndy
Yes, I already have a valve at the pump. It will divert the draw to a vertical pigtail that is currently capped. I just need a fitting, clamp, and hose.. I’m doing all this arm flapping because I do not want to go onto the store. I want to order it on line. Anyway, I went ahead and order 1/2” and 3/4” in adapters. One of them will get it.. I could have used the cam o kit by screwing the brass valve into the pigtail and capping the other side..thanks again cavie
|
I don't understand the
fitting part. The small 1/4" two ft clear hose slips over the stub. The other end goes in the jug. if you already have the t and the valve that's all you need.
you could have order the kit from amazon and been done with it by now
Thor Forums
