01) where is this located? - Make sure the freeze sensor is installed into the coils of the evaporator and not dangling free.
02) which is easier to work with - insulation or spray foam
03) will lowes have this ..is there a brand or pics video of what to wrap - Remove the top cover on the roof and wrap the airbox with adhesive style insulation
04) can i use the same hvac tape? - pipe insulation
---End Quote---
1) The Freeze Sensor is located inside the unit. You need to remove the inside cover to see it. It has a white wire and it runs up to the evalporator (air intake side).
*** Thanks this is clear
2) Self-adhesive insulation is easiest to use the outside of the airbox on the roof.
*** i an reviewing exactly what will help once outside cover is removed. I am watching this video there is a pic below. Do you insulate these coils ? with duct table or some rubber around them?
3) Frost-King Duct Insulation works well....
https://www.lowes.com/pd/Frost-King-...lation/1081449
*** need to use this on the airbox? i need to find exactly what an airbox it?
will get from lowes
4) I used rubber pipe insulation on the short pipe coming out of the compressor. I used metal duct tape to seal up the divider.
*** will measure and get pipe insulation from lowes and metal duct tape same as HVAC tape?