Quote:
Originally Posted by Snks
Thank you for posting the installation instructions. I printed them out and it appears the plywood baffle is not cut correctly. It is suppose to be a 1/4” below the bottom of the condenser. It is 3/4” above it and there is a sensor in the pics that is likely tripping as it could get too hot.
I will send the pictures to Thor and see what they say. Luckily it’s easy fix.
|
I was looking at the wire schematic on page 20 in the owners manual and it shows where an optional condenser fan (*F) could be wired in. There is also an optional freezer blower (*S) that I have not heard of before.