Thor Forums

[p3black]

Hey people, have a bit of an issue with some clearance lights. I was changing out all my clearance lights due to their age and condition (2007 Four Winds/Thor Chateau). I was upgrading them from incandescent to LED. I started the installation on the front clearance lights and check each one after to ensure they functioned. Well, i left the battery connected when installing the third light, and I ended up crossing the wires. Now none of the clearance or marker lights come on. The headlights still function, so I used that rulebook the switch. I checked every fuse in the engine electrical control panel as well as in the cabin, and there are no blown fuses. I have been searching for an in-line fuse, but I haven't come across one. My presumption is the the light switch isn't the issue as the headlights function normally. I contacted Thor for a wiring diagram, but they could not provide one. I asked a few RV places in town, but they won't provide the diagrams because they would rather charge me $130 an hour to slowly do a wire trace. does anyone have an idea where to look, or if this particular model has some type of fuse in the wire line? Could it potentially be run through a relay, and if so, is there a way to check it (I only the swap method)? Any help or insight as to where to look would be greatly appreciated. Thanks!