Quote:
Originally Posted by cmikego74
I removed the surge protector first to verify. Its out of the equation right now. I opened up ATS I have 122 volts on all the HOT where there should. Tried shutting the entire rig down, powering everything off. I even tried just generator; it is actually shows L2 with 8 volts (looked like a 0)
|
What is "it".
Try describing where you are measuring:
Example:
ATS input from SP - L1 to neutral - 123 VSC, L2 to neutral - 124 VAC, L1 to L2 - 246 VAC