Quote:
Originally Posted by TerryJames
In the Axis 25.2 we have a couple of bends to contend with even if we were to use the dump straight out the compartment ... (additional 90-degree bend if we flow out the floor of the compartment) ... with either a hydraulic or electric macerator assist. Looks like the potential advantage for either macerator would probably be to pump up hill with a smaller hose and not have to have a large dump hose hook-up etc.. However, for tank cleaning and flushing we will probably need to add a wand and/or direct tank wall flushing rather than depending on “back flush around the bends” for our situation. Thank you for all the input.
Best Regards
|
In the video I watched for the Valtera, there are two options...
1) straight pipe with high pressure tip on the end for tanks below the toilet
2) a bendable pipe with a pressure tipe with several water outlets on the tip
I went to Amazon to find this information...after looking at Sewer Solution and the ensuing videos...showing that most of those items really do not flush out the tank well.
https://www.amazon.com/Valterra-B840...ucts+tank+wand
https://www.amazon.com/Valterra-A01-...ucts+tank+wand
Thor Forums
