Quote:
Originally Posted by FW28z
Glad you were successful. Might be something I need to do in the future. Still not sure how I will access the area though.
|
Thank you, FW28z. Access in my case was pretty easy. The cold and hot water faucet for the shower was mounted with several square headed wood screws that had little pop-off caps anchored by clear plastic washers under the heads of the screws. No need to pull the H & C handles, but you may have to pull the hose to the shower head off to gain more clearance. My rig also had a clear silicon bead that ran around the perimeter of the faucet body where it mated to the shower wall. It broke easily and when I put things back together, I laid down a new and slightly thicker bead.
Hope this helps.