Thor Forums

[Buckle]

Originally Posted by PeteBailey

I have a 2018 Hurricane 29M that had the same problem with turn signals causing audio to be lost. Not only did the radio go silent when turn signals were on it did the same when I shifted into reverse. The other issue I had with the turn signals was that I like to leave the rear camera on when driving so I can see my Jeep. Any time I used the turn signals the monitor would return to the radio screen instead of the camera where I wanted it.



I pulled the radio out from the dash and when I looked at the wiring I found an orange wire labeled "Back View Control". I disconnected that wire and now the cameras work the way I want them to. Shifting to reverse or using the turn signals doesn't automatically switch to camera view and silence the radio but I can manually switch to camera mode and it stays on the camera and switches to the correct side camera when signals are used.

Just to be clear then, by disconnecting the orange label "back view control" you are still able to use the back camera in reverse by turning choosing the back up camera on the menu. You lose the automaticity when you put the vehicle into reverse, same for the side view? And audio is not lost?